SW Series Vacuum Generator and Pump

Specially engineered to greatly reduce sound emissions, SeaLand vacuum generators open new installation options for boatbuilders and renovators. Low-profile vacuum generator allows use in a wide range of hulls. Separate vacuum pump and tank components also add installation versatility.

Long-lasting performance – high-strength polyethylene tanks deliver years of service.

Quiet, reliable operation – pump gearing optimized for lowest sound emission. Runs dry without damage.

Diverse installations – low-profile vacuum generator can be installed with vacuum pump and tank together or apart. SW series pump can also be installed with a standard vacuum tank.

Pre-set vacuum switch – turns pump on and off to maintain proper vacuum.

Low power draw – bellows-type pump draws only 3-6 amps per flush. 12 VDC and 24 VDC models available.

Simple installation – switch and pump are prewired. Vacuum pump and tank are preplumbed.

Mounting spindles included – must be installed horizontally. Use with OdorSafe Plus 1.5-inch (38 mm) ID sanitation hose.

SW Series Vacuum Generator

Model	Height	Voltage	Product Weight	Parts List	Owner’s Manual
VGLP-SW	8 in. (203 mm)	12 or 24 VDC	16.5 lbs. (7.5 kg)

SW Series Vacuum Pump

(must be installed with separate vacuum tank)

Model	Flow Rate	Voltage	Product Weight	Parts List	Owner’s Manual
SW	3.8 gpm (14.4 lpm)	12 or 24 VDC	7.0 lbs. (3.2 kg)